REMS - Radial Press Jointing

Universal, super handy electric tool with automatic circuit control for producing pipe pressing joints for all common pressfitting systems. For battery and corded operation. Pipe pressing joints Ø 10–40 mm, 3/8" - 1 1/4". REMS pressing tongs Mini.

REMS Mini-Press ACC – universal up to Ø 40 mm / 1 1/4".
Super light, super small, super handy. With automatic circuit control. Secure crimping in seconds. Automatic locking of pressing tongs. Assortment of REMS pressing tongs Mini for all common pressfitting systems.

Universal, super handy electric tool with forced return for making press joints for all common pressfitting systems.
Li-Ion 22 V Technology.
Press joints Ø 10 – 40 mm, Ø ⅜ – 1 ¼"

REMS Mini-Press 22 V ACC Li-Ion – universal up to Ø 40 mm.
Super light, super small, super handy, ultra fast. Pressing in less than 4 s.
Automatic sequence of the pressing process. Automatic locking of the pressing tongs.
Li-Ion 22 V Technology for 50 % more pressings 1).
Assortment of REMS pressing tongs Mini for all common pressfitting systems.

1) Battery Li-Ion 21.6 V in comparison to Battery Li-Ion 14,4 V

REMS pressing tongs Mini / REMS pressing rings Mini
Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).

High compression pressing tongs/pressing rings in forged and specially hardened steel. Pressing contours of REMS pressing tongs/pressing rings are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.

Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.

Select pressing tongs Mini yourself!
Search for the required pressfitting system in the opposite table and select the correct pressing tongs size./ pressing ring size. Please note that pressfitting systems for gas installations may only be pressed with the pressing tongs Mini / pressing rings which are highlighted in yellow in the table.

Traceability according to EN 1775:2007
REMS pressing tongs Mini /pressing rings Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.
With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

Universal, manual radial press for poducing pipe pressing joints for all common pressfitting systems. Pressing joints with plastic and multi-layer composite tubes Ø 10–26 mm / 3/8-1". Complete range of REMS pressing tongs for all common pressfitting systems.

REMS Eco-Press – universal up to Ø 26 mm / 1".
Secure crimping in seconds.

High performance cropping tongs in forged and specially hardened steel for cutting threaded rods.
Steel, stainless steel up to strength class 4.8 (400 N/mm²) M 6 – M 10, UNC 3/8".

REMS cropping tongs Mini – cuts threaded rod in just 2 seconds.

Made of forged and specially hardened steel.

Reversible cropping inserts for double service life.

Cropping inserts with high precision thread contour machined on CNC production centres for exact guiding of the threaded rod in the cutting process. Plier parts, cropping inserts and specially machined and hardened cutting edges, made to fit exactly, for cutting without burr.

Cutting device in pliers design (Patent EP 1 459 825, Patent US 7,284,330). Very compact design and low weight of the REMS Mini cropping tongs due to special arrangement of the cropping tongs connection (Patent EP 2 347 862).

Driven by REMS Mini-Press ACC.

Universal, handy electric tool for making pipe pressing joints for all common pressfitting systems. Pressing joints Ø 10–108 mm / 3/8 - 4". REMS pressing tongs, also suited for drive units of other makes.

REMS Power-Press SE – universal up to 108 mm / 4".
Secure crimping in seconds. Automatic locking of pressing tongs. Complete assortment of REMS pressing tongs for all common pressfitting systems.

Universal, handy electric tool with switch-off signal for making pipe pressing joints for all common pressfitting systems. Pressing joints Ø 10–108 mm, 3/8 - 4". Complete range of REMS pressing tongs/pressing rings for all common pressfitting systems.

REMS Power-Press – universal up to 108 mm / 4".
Secure crimping in seconds. Automatic locking of pressing tongs.

Universal, handy electric tool with automatic circuit control for making pipe pressing joints for all common pressfitting systems. Pressing joints Ø 10–108 mm / 3/8 - 4". Complete range of REMS pressing tongs/pressing rings for all common pressfitting systems.

REMS Power-Press ACC – universal up to Ø 108 mm / 4".
Secure crimping in seconds. Automatic circuit control. Automatic locking of pressing tongs.

Universal, handy electric tool with switch-off signal for producing pipe pressing joints for all common pressfitting systems. For battery and corded operation. Pipe pressing joints Ø 10–108 mm / 3/8 - 4". Complete range of REMS pressing tongs/pressing rings for all common pressfitting systems.

REMS Akku-Press Li-Ion – universal up to Ø 108 mm / 4".
Secure crimping in seconds. Automatic locking of pressing tongs.

Universal, handy electric tool with automatic circuit control for producing pipe pressing joints for all common pressfitting systems. For battery and corded operation. Pressing joints Ø 10–108 mm / 3/8 - 4". Complete range of REMS pressing tongs/pressing rings for all common pressfitting systems.

REMS Akku-Press ACC Li-Ion – universal up to Ø 108 mm / 4".
With automatic circuit control and electronic service control. Secure crimping in seconds. Automatic locking of pressing tongs.

REMS pressing tongs / REMS pressing rings
High compression pressing tongs/ pressing rings in forged and specially hardened steel. Pressing contours of REMS pressing tongs/pressing rings are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.

Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. All pressing tongs marked with * have an optional connection (Patent EP 1 223 008, Patent US 6,739,172) for manual drive through the radial press REMS Eco-Press. Read and follow the installation and assembly instructions of the system provider/manufacturer.

Select pressing tongs/pressing rings yourself!
Search for the required pressfitting system in the opposite table and select the correct pressing tongs/pressing ring size. Please note that pressfitting systems for gas installations may only be pressed with the pressing tongs / pressing rings which are highlighted in yellow in the table. Intermediate tongs are necessary for driving the REMS pressing rings.

Traceability according to EN 1775:2007
REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.
With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

The suitability of press tools is determined basically by the manufacturer of press tools. Moreover the suitability of REMS press tools has been confirmed by the system manufacturer/supplier himself or approved through independent testing institutes.

Confirmation of suitability through the system manufacturer/supplier
More than 90 % of the manufacturers/suppliers of the pressfitting systems listed herein have tested REMS pressing tongs and confirmed the suitability for their pressfitting system.

Confirmation of suitability through independent testing institutes
The suitability of REMS pressing tongs for additional pressfitting systems have been confirmed through independent technical institutes:

TÜV-Certificates
Available for biroduct P, Geberit Mepla, mapress C-STAHL, mapress EDELSTAHL, mapress Kupfer, Nussbaum Cupress, Nussbaum Optipress, Uponor Unipipe, Viega-'profipress', Viega-'profipress G', Viega-'sanfix P', Viega-'sanpress', Viega-'Viegatherm P', Wavin Tigris. The TÜV-certificates confirm that REMS crimping tools are suitable for producing perfect and system-conformity pressing joints corresponding to these systems, both in conjunction with REMS pressing tongs and the pressing tongs of system manufacturers/suppliers.

Suitability test according to DVGW W 534 (potable water)
Pressing joints produced with REMS press tools have been tested by the state-operated material testing institute (MPA) in Darmstadt/Germany according to DVGW work sheet W 534. The institute is certified to perform these tests by the DVGW. A representative cross-section of press joints of pressfitting systems Geberit Mapress Edelstahl, Raccorderie Metalliche inoxPRES, Raccorderie Metalliche steelPRES, Uponor Unipipe and Viega-'profipress' was tested. The test results led to the result that all REMS pressing tools are suitable for producing perfect and system conformity pressing joints in accordance with these systems.

Suitability test according to DVGW VP 614/625 or prEN 1254-7 (gas)
Pressing joints produced with REMS press tools have been tested by the TÜV or by the Land Material Testing Institue Nordrhein-Westfalen or the DVGW Research Institute Karlsruhe according to DVGW regulations VP 614/625 or by BSI (UK) according to prEN 1254-7. A representative cross-section of pressing joints of pressfitting systems Geberit Mapress Edelstahl Gas, Geberit Mapress Kupfer Gas, Henco Gas, IBP >B< Gas, Kembla KemPress Gas, Pegler Yorkshire X-Press Copper Gas, Uponor MLC-G, Viega 'profipress G', Viega 'sanpress INOX G', Viega 'propress G GAS' (AUS) was tested. The test results led to the result that all REMS pressing tools are suitable for producing perfect and system conformity pressing joints in accordance with these systems.

High performance cropping tongs in forged and specially hardened steel for cutting threaded rods.

Steel, stainless steel M 6–M 12. UNC 3/8 - UNC 1/2".

Cropping inserts with precise thread contour machined on CNC production centres ensure guidance of threaded rod during cropping. Thus cropping to length, free from burrs. After cropping the threaded rod, just screw it into the threaded connection of the pipe clamp or nut. Drive through all REMS radial presses and through suitable radial presses of other makes.

High-grade cable shear in forged and specially hardened steel for cutting electric cable.

Electric cable up to Ø 30 mm.

REMS cable shear with replacable cutting blades manufactured on CNC production centres ensure a precision blade geometry and long service life. Large cutting range. Drive through electric REMS radial presses and through suitable radial presses of other makes.